English

I-MDH-65T High Precision Gantry Press

Umfanekiso oBonisiweyo we-MDH-65T High Precision Gantry Press
  • I-MDH-65T High Precision Gantry Press

Inkcazo emfutshane:

●Uhlobo:Indlela ye-MDH-65T

●Ixabiso:Ingxoxo

●Ukuchaneka:Ibanga eliKhethekileyo le-JIS/JIS

●Ubunzima bokuDie obuphezulu:OKUPHEZULU 120 KG

 

● I-gantry type precision press isebenzisa i-post guide ezine kunye ne-plunger guide guide structure ezimbini, ezinokulawula ngokufanelekileyo ukuguquguquka kokuhamba phakathi kweendawo zokusebenza. Kunye nenkqubo yokuthambisa ioyile enyanzelisiweyo, isixhobo somatshini sinokunciphisa ukuguquguquka okuncinci kobushushu phantsi kokusebenza ixesha elide kunye nemeko yomthwalo ongaphelelanga, nto leyo enokuqinisekisa ukucutshungulwa kwemveliso okuchanekileyo ixesha elide.

 

● Ulawulo lwe-microcomputer oluhambelana nomntu nomatshini, ukuze kufezekiswe ulawulo olubonakalayo lomsebenzi, inani leemveliso, imeko yomatshini ngokujonga nje (ukwamkelwa okulandelayo kwenkqubo yokucubungula idatha ephakathi, isikrini sokwazi yonke imeko yomsebenzi womatshini, umgangatho, ubungakanani kunye nolunye ulwazi).


Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu eziphambili:

● Isakhelo sokushicilela sisebenzisa isinyithi esiqinileyo esinamandla, kwaye uxinzelelo lwangaphakathi lwesixhobo somsebenzi luyasuswa ngendalo ixesha elide emva kokulawula ubushushu obuchanekileyo kunye nokushisa, ukuze ukusebenza kwesixhobo somsebenzi webhedi kube yeyona meko ilungileyo.

● Ulwakhiwo lwe-gantry oluqhekekileyo luthintela ingxaki yokuvulwa komzimba womatshini ngexesha lokulayisha kwaye lufezekisa ukucutshungulwa kweemveliso ezichanekileyo.

● I-crank shaft yenziwe yaza yabunjwa ngentsimbi ye-alloy ize emva koko yenziwe ngesixhobo somatshini saseJapan esine-axis ezine. Inkqubo yoomatshini efanelekileyo kunye nenkqubo yokuhlanganisa iqinisekisa ukuba isixhobo somatshini sinokuguquguquka okuncinci kunye nesakhiwo esizinzileyo ngexesha lokusebenza.

Uhlobo lweGantry High Speed ​​​​Lamination Press

Iiparameters eziphambili zobuGcisa:

Imodeli I-MDH-65T
Umthamo KN 650
Ubude bestroke MM 20 30 40 50
I-SPM ephezulu I-SPM 700 600 500 400
Ubuncinci be-SPM I-SPM 200 200 200 200
Ukuphakama kwedayi MM 260 255 250 245
Ukulungiswa kokuphakama kwedayi MM 50
Indawo yesilayida MM 950x500
Indawo yokuxhasa MM 1000x650
Ukuvula ibhedi MM 800x200
Ukuvulwa kwe-bolster MM 800(±)x650(T)x140
Injini ephambili KW 18.5x4P
Ukuchaneka   Ibanga elikhethekileyo le-JIS/JIS
Ubunzima bokuDie obuphezulu KG I-MAX 300
Ubunzima obupheleleyo I-TON 14

Ubungakanani:

Iimveliso zeendaba (1)

Iimveliso zeendaba:

Ubungakanani (1)
Iimveliso zeendaba (1)
Ubungakanani (4)

Isikhokelo sePosi ezi-4 kunye ne-2 Plunger Guide Gantry Type Precision series (umatshini wokucinezela, i-punching press, umatshini wokubhoboza, i-mechanical power press, i-stamping press), umthamo ukusuka kwi-60ton ukuya kwi-450ton, ulawulo lwe-PLC, i-wet clutch, i-hydraulic overload ekhuselweyo, isakhiwo sefreyimu ye-alloy casting yentsimbi ephezulu (efanelekileyo kakhulu kwifreyimu eyilwe yi-computer analysis), icutshungulwa yinkqubo yokususa uxinzelelo lwangaphakathi, iphucula ngakumbi ifreyimu yokuqina okuphezulu eyimfuneko ekuchanekeni, ifezekise ingxolo ephantsi kunye nokungcangcazela okuphantsi, kunye nokuphucula ubomi benkonzo yedayi.

Ukongeza kwezi zibonelelo zilandelayo:

1). Hlaba ngesixhobo sokuvuthela inkunkuma. Kwaye embindini wetafile yokusebenza kukho itanki yenkunkuma.

2). Indawo ephakathi yokusika i-Punch ilawulwa ngokubanzi yi-pressure switch, i-position sensor.

3). Ezifana neemfuno zabathengi zinokuyila isantya esikhawulezayo nesicothayo (ngokubanzi esikufutshane nemveliso xa isantya sincipha kwaye icinezelwe.

4). Ngomsebenzi wokubala ngokuzenzekelayo, iindlela zokulawula eziqhekekayo nezizenzekelayo, unokucinezelwa ngesandla kwindawo yokumisa isikhunta kuyo nayiphi na indlela yokuhamba, uxhotyiswe ngeqhosha lokuthatha ungxamiseko, kwaye unokuxhotyiswa ngesixhobo sokukhusela esibonakalayo.

Okwangoku, iteknoloji ye-die yaseTshayina ivuthiwe, kodwa kusekho indlela ende ekufuneka ihanjwe ukuze igqibelele. Ulwalathiso lophuhliso lwetekhnoloji yesixhobo se-die Motor Core High Speed ​​Punch Press luyahlalutywa. Phantsi kokutsalwa kwemarike yemveliso ukuya kwiintlobo ezininzi, iibhetshi ezimbalwa, kunye nesantya esitshintsha ngokukhawuleza sokuhlaziya, esiqhutywa ziiteknoloji ezintsha zokuvelisa ezifana netekhnoloji yekhompyutha, itekhnoloji yokuvelisa uyilo lwe-die imiselwa ngoyilo oluncediswa yikhompyutha, oluxhomekeke kumava esandla kunye noomatshini bendabuko kunye netekhnoloji. Uyilo oluncediswa yiKhompyutha (CAD) olunoyilo, ukusika i-NC kunye nomatshini wombane we-NC njengesiseko salo lutshintshe indlela yalo yokuvelisa.

 

FAQ

Umbuzo: Ngaba iHowfit nguMvelisi woMshini woShicilelo okanye nguMrhwebi woMshini?
Impendulo: I-Howfit Science and Technology CO., LTD. ngumvelisi we-Press Machine ogxile kwimveliso kunye nokuthengisa i-High Speed ​​Press esebenza kwi-15,000 m.² kangangeminyaka eli-15. Sikwabonelela ngenkonzo yokwenza ngokwezifiso umatshini wokushicilela ngesantya esiphezulu ukwanelisa iimfuno zakho ezithile.
 
Umbuzo: Ngaba Kulula Ukutyelela Inkampani Yakho?
Impendulo: Ewe, iHowfit ikwisixeko saseDongguan, kwiPhondo laseGuangdong, eMzantsi weTshayina, apho kufutshane nomgaqo omkhulu, imigca yemetro, iziko lezothutho, amakhonkco aya edolophini nakwidolophu, isikhululo seenqwelo-moya, isikhululo sikaloliwe kwaye kulula ukundwendwela.
 
Umbuzo: Mangaphi Amazwe Oye Wenze Isivumelwano Nawo Ngokuphumelelayo?
Impendulo: UHowfit wenze isivumelwano ngempumelelo neRussian Federation, iBangladesh, iRiphabliki yaseIndiya, iSocialist Republic of Vietnam, iUnited Mexico States, iRiphabliki yaseTurkey, iIslamic Republic of Iran, iIslamic Republic of Pakistan njl. ukuza kuthi ga ngoku.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale