Isikhokelo seposi ezi-4 se-H-160T kunye nesikhokelo se-2 Plunger Guide Gantry Type Precision Press

Inkcazo emfutshane:

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iiparameters eziphambili zobuGcisa:

Imodeli		H-160T
Umthamo	KN	1600
Ubude bestroke	MM	30(40MAX)
I-SPM ephezulu	I-SPM	400
Ubuncinci be-SPM	I-SPM	150
Ukuphakama kwedayi	MM	360-410
Ukulungiswa kokuphakama kwedayi	MM	50
Indawo yokuxhasa	MM	1600×850
Indawo yesilayida	MM	1500×600
Ukuvulwa kwe-bolster	MM	1300×200
Injini ephambili	KW	37

Iimpawu eziphambili:

1. Isakhelo sokushicilela sisebenzisa isinyithi esinamandla aphezulu, kwaye uxinzelelo lwangaphakathi lwesixhobo somsebenzi luyasuswa ngendalo ixesha elide emva kolawulo lobushushu oluchanekileyo kunye nokufudumala, ukuze ukusebenza kwesixhobo sokusebenza embhedeni kufikelele kwinqanaba elifanelekileyo.
2. Ulwakhiwo lwe-gantry oluqhekekileyo luthintela ingxaki yokuvulwa komzimba womatshini ngexesha lokulayisha kwaye lufezekisa ukucutshungulwa kweemveliso ezichanekileyo.
3. I-crank shaft yenziwe yaza yabunjwa yintsimbi ye-alloy ize emva koko yenziwe ngesixhobo somatshini saseJapan esinee-axis ezine. Inkqubo yoomatshini efanelekileyo kunye nenkqubo yokuhlanganisa iqinisekisa ukuba isixhobo somatshini sinokuguquguquka okuncinci kunye nokusebenza okuzinzileyo.
4. I-press isebenzisa isikhokelo seposi ezine kunye nesakhiwo sesikhokelo se-plunger ezimbini, esinokulawula ngokukuko ukuguquguquka kokufuduka phakathi kwezinto zokusebenza. Kunye nenkqubo yokuthambisa ioyile enyanzelisiweyo, isixhobo somatshini sinokunciphisa ukuguquguquka okuncinci kwesihloko phantsi kokusebenza ixesha elide kunye nemeko yomthwalo oyingxenye, enokuqinisekisa ukucutshungulwa kwemveliso ngokuchanekileyo kwexesha elide.
5. Ulawulo lwe-microcomputer olusebenzisa i-interface yomntu ukuze kufumaneke ulawulo olubonakalayo lomsebenzi, inani leemveliso, imeko yomatshini ngokujonga nje (ukwamkelwa kwenkqubo yokucubungula idatha ephakathi, isikrini sokwazi yonke imeko yomsebenzi womatshini, umgangatho, ubungakanani kunye nolunye ulwazi).